Trance Hero PB by pbsonic
Oscillator 1 timbre
Only square oscillators are enabled, resulting in a narrow sounding tone.
Pulse width of square oscillator is set to 77% (50% is perfectly square, 100% is very short pulsewave) and is modulated by LFO 1.
LFO 1 direct modulation amount for pulse width of square oscillator is 140.
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 150.
Tone for oscillator 2 is off.
Volume (VCA) volume
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is off.
High-pass filter (HPF) timbre
High-pass filter cut-off frequency is manually set to 47.59Hz (48).
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 66.29Hz (12) and is modulated by Mod Wheel, Note Vel, VCF Env.
Mod Wheel mod-matrix 1 modulation amount for low-pass filter cut-off frequency is 34.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 181.
Low-pass filter envelope amount is modulated by Note Vel.
Note Vel direct modulation amount for low-pass filter envelope amount is 68.
Filter has no resonance.
Oscillator drift & unison detuning timbre
Unison detune level is set to ±0 cents (0) and is modulated by Mod Wheel.
Mod Wheel mod-matrix 2 modulation amount for unison detune level is 62.
Oscillators drift level is manually set to 18. Drift rate is 0
FX routing & levels fx
FX mode is set to Send, and routing is
Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is off. Effect 4 level is manually set to 100.
Flange & Reverb fx
not yet complete
Delay fx
not yet complete
Phase fx
not yet complete
Mod Wheel modulator
Controls VCF Cut-off Frequency, Unison Detune.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | VCF Cut-off Frequency | 34 |
| timbre | matrix | Unison Detune | 62 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 181 |
| menu | VCF Envelope Velocity Sensitivity | 68 | |
| menu | VCA Envelope Velocity Sensitivity | 128 |
LFO 1 modulator
Controls OSC 1 Pulse Width Modulation Depth.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | OSC 1 Pulse Width Modulation Depth | 140 |
| name | value |
|---|---|
| LFO 1 Rate | 1.98Hz (134) |
| LFO 1 Delay / Fade | 0s (0) |
| LFO 1 Shape | Triangle |
| LFO 1 Key Sync | off |
| LFO 1 Arp Sync | off |
| LFO 1 Mono Mode | 0 |
| LFO 1 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 1.13s (128) |
| VCA Envelope Sustain Level | 100% (255) |
| VCA Envelope Release Time | 1.13s (128) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 181 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 1.28s (138) |
| VCF Envelope Sustain Level | 14% (37) |
| VCF Envelope Release Time | 7.8s (187) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |